Is there an item or items you're interested in, and would like to try, without having to purchase the minimum amount required? Well, we've gathered up a few items people are constantly requesting samples of, and listed them here! So try what you'd like, or even considered!

Let us know if there are other items, not listed, that we should add! Minimum freight charge of $5.00 will apply for totals under $10.00 shipping UPS ground!

COLORED PVC CARDS - (Normal minimum is 100 per color)

Sample Chain of available colors of PVC cards, on a convenient chain! DO NOT PRINT ON THESE, your printer will be very unhappy because of the punch hole!

BACK TO TOP

BADGE HOLDERS - (Normal minimum is 100 per item)

Standard Vinyl Badge Holders, sealed on three sides, last side is opened with a thumb area cut out, so the badge can be removed after being attached to clip or lanyard.

Set includes:

• 1 #1013DV IBM/CC size, Vertical (standing tall) with clip riveted on.
• 1 #1013DH IBM/CC size, Horizontal (laying down) with clip riveted on.
• 1 #1013GV MILITARY size, Vertical with clip riveted on.
• 1 #1013GH MILITARY size, Horizontal with clip riveted on.
• 1 #1014DV IBM/CC size, Vertical with strap slot and chain holes
• 1 #1014DH IBM/CC size, Horizontal with strap slot and chain holes
• 1 #1014GV MILITARY size, Vertical with strap slot and chain holes
• 1 #1014GH MILITARY size, Horizontal with strap slot and chain holes

Total of 8 holders for $5.00

CC size only. These holders have the holes punch thru the front and back flaps, so when the badge clip, lanyard or neck chain is threaded thru, the badge is "locked" inside.

Set includes:

• 2 Vertical (standing tall) with strap slot and chain holes
• 2 Horizontal (laying down) with strap slot and chain holes

Total of 4 holders for $3.50

Or

• 2 Vertical with only strap slot hole
• 2 Horizontal with only strap slot hole

Total of 4 holders for $3.00

Or all 8 of the Self-Locking for $6.00

These come in IBM/CC or the Larger Military size. The holes are punched only in the back flap, so the badge can be removed after being attached to clip, lanyard, or neck chain.

Set includes:

• 2 IBM/CC Vertical (standing tall) with colored FRAME (colors will vary) with strap slot and chain holes
• 2 IBM/CC Horizontal (laying down) with colored BAR (colors will vary) with strap slot and chain holes
• 2 MILITARY Horizontal colored BAR (colors will vary) with strap slot and chain holes

Total of 6 colored samples @ $5.00

These come in IBM/CC size only, and have a magnet behind the badge, and another at the end of the pocket tab, which will hold the badge in place. DO NOT USE WITH MAGNETIC STRIPED CARDS!

Set includes:

• 1 Vertical (standing tall)
• 1 Horizontal (laying down)

Total of 2 Magnetic holders @ $3.50

Arm Band Holders and Straps Set

These are meant to hold IBM/CC size cards, on the outside of your jacket or sleeve. They are heavy-duty vinyl, with leather tabs, that hold the Metal clips of the strap (sold separately in different colors).

Set includes:

• 1 Vertical (standing tall)
• 1 Horizontal (laying down)
• 1 Elastic Strap with metal clips (colors vary)

Total of 3 pieces @ $9.00

These card holders are frosted, molded, hard plastic, CC sized. They can hold one 30 mil card on the outside, and two 30 mil cards on the inside. Slot and chain holes exist for use with any neck wear. The outside dimensions are 2-3/8" X 4-1/4".

Set includes:

• 2 Vertical (standing tall)
• 2 Horizontal (laying down)

Total of 4 pieces @ $5.00

These card holders are frosted, non-glare, molded, hard plastic, CC sized. They can hold a standard prox card, CR80-size card, side loaded. Slot and chain holes exist for use with any neck wear. Card holding area measures approximately 3-1/2" X 2-1/8".

Set includes:

• 2 Vertical (standing tall)
• 2 Horizontal (laying down)

Total of 4 pieces @ $3.50

Easy-Access "Half-Holders" Card Holder Set

These new "Half-Holders" are designed to be used with PVC cards that need the bottom of the card exposed (i.e. for a swipe bar code or a mag stripe). Chain holes and slot punch are molded in for accessory use. Dimensions: 3-1/2" X 1-1/2".

Set includes:

• 2 Card Holders

Total of 2 pieces @ $3.00

Milky, Semi-Rigid Multi-Card/Multi-Hang Card Holder Set

These new card holders can be used horizontally or vertically. One holder now will handle both alignments! It will hold 1 to 5 cards at 30 mil thickness. Dimensions: 2 1/8" x 3 3/8 " (54 x 86).

Set includes:

• 2 Card Holders

Total of 2 pieces @ $3.00

Shielded Badge holder

The patent pending Secure Badgeholder™ is a durable, rigid plastic card holder designed to protect a single contactless PIV, CAC, or identification card.

Set includes:

• 1 Shielded Badge Holder

Total of 1 piece @ $10.00

BACK TO TOP

BADGE CLIPS - (Normal minimum is 100 of each)

These have a 3" strap, that is ½" wide. With a "cloth-friendly" metal bull-dog clip on one end and a re-usable metal snap on the other end.

Set includes:

• 2 #1000V's Clear strap, Vinyl Badge clip
• 2 #1008MC Colored strap, (colors will vary)
• 2 #1003 All-Plastic one-piece badge clip
• 2 #1015 Clip attached to pressure sensitive 1" square pad

Total of 8 clips for $3.50

Or 5 of each for $8.75

BACK TO TOP

BADGE REELS - (Normal minimum is 10 of each)

These items have strong retractable nylon cords, and a reinforced vinyl strap with reusable metal snap.

Set includes:

• 1 BR-2 Reel with locking bar pin (colors vary)
• 1 BR-3 Reel with belt clip (colors vary)
• 1 BR-4 Heavy-Duty reel comes half black and half metal only
• 1 BR-10 Plastic reel with zipper attachment (ski reel, colors vary)
• 1 BR-11 Reel with push-button retraction (colors vary)

Or, 5 of one type. $15.00

Premiere Badge Reel Sample Set:
3 sample badge reels.

BACK TO TOP

NECK CHAINS - (Normal minimum is 100 of each)

These neck chains can be considered breakaways, but since there is no way to tell where they may breakaway, they are not reusable. Typical breakaway pressure is approximately 9 pounds of force, and the chain will break. If an adult is falling…their own body weight will break them free. These can also be cut down to smaller sizes with a pair of regular scissors.

Set includes:

• 1 #1012 36" Clear Breakaway Vinyl Tubular Neck Strap w/plastic connecting rod
• 1 #1012-24 24" long nickel-plated steel neck chain, 2.3mm bead
• 1 #1012-30 30" long nickel-plated steel neck chain, 2.3mm bead
• 1 #1012-36 36" long nickel-plated steel neck chain, 2.3mm bead
• 1 #1012-38P 38" PLASTIC colored neck chain, 4mm bead (colors with vary)

Or, 5 of one type. $3.00

BACK TO TOP

LANYARDS - (Normal minimum is 100 of each)

These are woven nylon, and come in many colors, breakaway or non-breakaway, with swivel metal hook, or bull dog clip or split ring….If you'd like to see the quality of this item, pick from the samples below:

• 2 with plastic, reusable breakaway
• 2 non-breakaway

3/8" wide woven nylon neck lanyards, 4 Lanyards @ $3.00

Or 5/8" wide woven nylon neck Lanyards, 4 Lanyards @ $4.00

Color and attachment may vary. You're welcome to type in the special instruction area of your order form what you most like to see, and that is what we will try to match as closely as possible.

BACK TO TOP

LUGGAGE TAG LAMINATES AND LOOP SET - (Normal minimum is 100 of each)

This is the perfect set to purchase if you'd like to make laminated luggage tags for your own use, or to check out for your company to use at trade shows, or even if you want to make ID cards in a vertical format! These must be laminated in a hot laminator to seal, but once sealed, they are permanent and waterproof!

10 Luggage-tag sized laminating pouches, with slot hole punched in short side, 5 or 7 mils per side thickness.

• 5 6" Clear Worm Loops
• 5 6" Colored Worm Loops (colors vary) OR 5 Plastic Colored Luggage Straps (colors vary)

Total of 10 pouches and 10 loops @ $2.50

BACK TO TOP

INSTAFINISH FOLDERS - (Normal minimum is 10)

These folders are White in color, and there is a flap of laminate on the front AND BACK covers of each folder. They do require the use of a 12" wide heat laminator, like our B-12A, to seal. But what you can do is to print out whatever you'd like…right on your office printer, and create your own custom folders within seconds! Each one has fold in flaps to hold your literature, plus cut outs to hold your business card. These are also great for school/college reports, meetings, presentations, mailings etc…etc…etc…anyplace you want total control over exactly how you look!

10 Luggage-tag sized laminating pouches, with slot hole punched in short side, 5 or 7 mils per side thickness.

5 Patented Instafinish Folders @ $10.00

BACK TO TOP

Avant hopes you've found the samples listed here that are of the most help to you. But if there's something we've missed, please drop us a line so we can try to put together other sample kits!